Oem 96 Well Oligo Synthesis Plate Company - Alumina(ABN) SPE – BM Life Science

Alumina(A/B/N)Alumina solid phase extraction column/SPE column

Alumina is a typical lewis acid, The aluminum atom center lacks two electrons. It has  strongly polar adsorbent, similar to that of silicone, There are three high activity levels of acidity, alkalinity and neutrality; Alumina also has a special effect on theπelectrons of aromatic hydrocarbons, It is better than silicone in high pH conditions. The main retention mechanisms are lewis acid/base action, polarity and ion exchange.

Acid alumina The lewis acid properties of alumina-A (pH=4.5) were enhanced, This kind of adsorbent has better retention for the rich electron compounds. In addition, when pretreatment with acidic solution, the adsorbent has weak cationic properties, the surface is more likely to retain neutral and negatively charged substances (such as  electroneutral  or acidic anions), Can’t keep a positive charge.The weak ion exchange property also makes it easier to retain the negative charge material.

Basic alumina The surface of the Alumina-B(pH=10) is favored to retain either positive or hydrogen – bonded materials. Aluminum oxide treated with alkaline solution has anionic properties and cationic exchange function. In addition, although the surface has the characteristics of lewis base, it can be retained for the electron sample, such as neutral amine compounds. The ability is much lower for neutral and acidic alumina. In addition, strong hydrogen bond can be found on the alumina-b, so the effect of the polar cationic sample is also obvious.

Neutral alumina Alumina-N(pH=7.5) is also a strongly polar adsorbent. Under the condition of high pH, alumina is more stable than that of the unbonded functional group. Finer particles ensure good extraction efficiency, so a small size cylindrical bed (50mg) is the most commonly used product. The adsorbent is electrically neutral and tends to retain rich electronic compounds such as aromatic and fatty amines. At the same time, there is also the ability to retain compounds containing electronegative groups such as oxygen-containing, phosphorous and sulfur atoms. Alumina-N can be used for extraction and separation of polar or non-polar substances in water-soluble and non-aqueous samples.

Product advantages:

★ Product quality is stable,  good reproducibility, load relative standard deviation (RSD) < 5%.

★ The packing is clean and there is no blank background interference.

★ The recovery rate is high, and the recovery rate of add the sample 10~100ppm is the best range of 95%~105%.

★ Product cost performance is among the best products in the world.

Application scope:

★ Soil;Oil;Body fluids (plasma/urine etc.);Food;Drug etc.

Typical application:

★ Petroleum, synthetic raw oil distillates, synthetic organic compounds.N

★ Sudan red, malachite green, vitamins, antibiotics, aromatic oils, enzymes, glycosides and hormones, etc.N

★ Separation of radioactive compounds, isotope generators.A

★ The phospholipids, steroids, catecholamine.B

★ Food/feed additives.AN

★ Pesticides, herbicides, separation of pollutants.NB

★ Non-polar organic adsorbents, oil and lipid separation

★ Synthetic organic compounds are separated.

★ Natural products, plant pigments.

★ Japanese JPMHLW official method: pesticide in food.

★ AOAC and EPA methods.

Quality commitment:

★ We ensure that every product is qualified, adopt strict quality control standard and carry out every batch inspection.

★ Ensure that every product has no blank interference, and the sample recovery rate is superior to that of the state, reaching the highest level of the same kind of products.

Service commitment:

★ We provide professional technical support for free.

Order Information

Sorbents

Form

Specification

Pcs/pk

Cat.No

Alumina A(ALA)

Cartridge

100mg/1ml

100

SPEALA1100

200mg/3ml

50

SPEALA3200

500mg/3ml

50

SPEALA3500

500mg/6ml

30

SPEALA6500

1g/6ml

30

SPEALA61000

1g/12ml

20

SPEALA121000

2g/12ml

20

SPEALA122000

Plates

96×50mg

96-well

SPEALA9650

96×100mg

96-well

SPEALA96100

384×10mg

384-well

SPEALA38410

Sorbent

 100g

Bottle

SPEALA100

Sorbents

Form

Specification

Pcs/pk

Cat.No

Alumina B(ALB) 

Cartridge

100mg/1ml

100

SPEALB1100

200mg/3ml

50

SPEALB3200

500mg/3ml

50

SPEALB3500

500mg/6ml

30

SPEALB6500

1g/6ml

30

SPEALB61000

1g/12ml

20

SPEALB121000

2g/12ml

20

SPEALB122000

Plates

96×50mg

96-well

SPEALB9650

96×100mg

96-well

SPEALB96100

384×10mg

384-well

SPEALB38410

Sorbent

 100g

Bottle

SPEALB100

Sorbents

Form

Specification

Pcs/pk

Cat.No

Alumina N(ALN) 

Cartridge

100mg/1ml

100

SPEALN1100

200mg/3ml

50

SPEALN3200

500mg/3ml

50

SPEALN3500

500mg/6ml

30

SPEALN6500

1g/6ml

30

SPEALN61000

1g/12ml

20

SPEALN121000

2g/12ml

20

SPEALN122000

Plates

96×50mg

96-well

SPEALN9650

96×100mg

96-well

SPEALN96100

384×10mg

384-well

SPEALN38410

Sorbent

 100g

Bottle

SPEALN100